
Settings and configurations are accessible in "Properties" Widget.
To get there, Right-Click on the component and select "Properties"· in the dropdown menu.
There are 2 properties common to any Component:
- id: This is the name shown in the Circuit Canvas, can be anything you want.
- Show id: Show or hide id in the Circuit Canvas..
Each type of Component has it's own set of properties, to edit values just Double-Click on the value and select option or edit value.
Some values are related to units, for example in Resistor, resistance value will change unit to KΩ if value is >=1000 , or to mΩ if <=0,001. It can be a little confusing the first time.
Tutorial about Logic Components
_____________________________________________________________________________________________________________________________
Component List:
MetersProbeAmperimeter Voltimeter Frequencimeter Oscope |
SourcesFixed VoltClock Wave Gen. Volt. Source Current Source Rail Ground |
SwitchesPushSwitch Switch Dip Relay KeyPad |
PassivePotentiometerResistor ResistorDip Capacitor Electrolytic Cap. Inductor |
ActiveDiodeVolt. Reg. OpAmp Mosfet BJT Analog Mux |
OutputsLedLedBar LedMatrix WS2812 Led 7 Segment |
HD44780 Pcd8544 Ks0108 Ssd1306 |
Stepper Servo Audio Out |
LogicGatesFunction Counter Full Adder Shift Reg. |
Flipflop D Flipflop JK Latch Ram/Rom I2C Ram/Rom |
Mux Demux Decoder (4 to 10/16) Encoder (10/16 to 4) Bcd to 7S I2C to Parallel |
ADC DAC 7 Seg BCD lm555 |